Saturday, 24 February 2018

author photo
Windows Could Not Automatically Detect This Network’s Proxy Settings (How to Fix)
Here is how to solve Windows could not automatically detect this network's proxy settings error. Disable proxy server to fix network proxy settings error. Windows Could Not Automatically Detect This Network's Proxy Settings. 

Fix Windows could not automatically detect this network's proxy settings: If your WiFi is not working and the network icon has a yellow exclamation mark next to it on the taskbar then you might be facing the error "Windows could not automatically detect this network's proxy settings."

Searches related to Windows Could Not Automatically Detect This Network’s Proxy Settings: network proxy settings windows 10, windows could not automatically detect this network's proxy settings reddit, windows could not automatically detect this network's proxy settings not using proxy, windows could not automatically the network's proxy settings, how do i fix my proxy server?, disable proxy server on internet explorer., windows could not automatically detect this network's proxy settings after update, reset network proxy settings windows 10.

There is a significant number of users facing network problems in Windows 10. A message appears stating that ‘Windows could not automatically detect this network’s proxy settings’ in the taskbar. The error, although not something specific to a particular compilation. Corrupt system files most of the time the villain plays.

No software on earth is perfect enough. No matter how you cheer on your favourite, the software is and will never be perfect. Windows 10, which is possibly the latest version, Windows faced many setbacks regarding its performance since its debut. Although Microsoft did solve some of the problems through software patches or was corrected in subsequent compilations, which are done twice in a year.

No matter what the cause of the error “Windows could not automatically detect this network’s proxy settings”, we are here for you with a small number of solutions. The solutions require your attention and we recommend that you do them with care, since sometimes you can even reverse the situation.

Brief: Steps to correct the error “Windows could not automatically detect this network’s proxy settings”

  • Verify the configuration of your proxy server.
  • Reset TCP / IP.
  • Disable your antivirus software.
  • Scan your PC.
  • DISM scanning
  • Restart your network adapter.
  • Run Solve network problems.
  • Update the drivers.
  • Repair the DNS.
  • Proxy.

How to fix “Windows could not automatically detect this network’s proxy settings[In Detail]

Verify the configuration of your proxy server

Press Win + R, an execution option will appear in the lower left corner, type inetcpl.cpl and then press Enter. You can also type “Internet Properties” in the Windows search to get the same result. In Internet properties, do this:
  • Look for the connections tab. It should appear 5th in the window.
  • Click Connections you will now see Local Area Network (LAN) Settings in the lower right corner.
  • Press the LAN settings.
  • Make sure you have cleared the “Use a proxy server for your LAN option” box.

Reset TCP / IP

If the damaged system files cause the problem, a TCP / IP reset can fix the problem, and here’s how you can reset it:
  • Use Cortana to execute the command prompt as an administrator.
  • Type: netsh int ip reset resetlog.txt in Command Prompt (administrator).
  • And that should be all, check if your problem has been solved or not.

Disable your antivirus software

Although a user who understands Internet security better or stays away from some of the obvious things that people usually do due to their lack of knowledge does not need antivirus software in Windows 10. Although Microsoft provides a stock solution known as Windows Defender (Windows Security will be called the Redstone 4 update), some users simply prefer an extra layer of protection for their PCs. Whatsoever the reason behind your purchase of a third-party antivirus solution, we recommend that you temporarily disable the software and then check whether the situation improves or not. If you solve the problem, it means that the problem is caused by the antivirus program itself and you must inform the company which solution you bought so they can help you even more.

Scan your PC

Do not get confused with antivirus software scanning; we are talking about SFC. Here’s how to do it:
  • Open the command prompt in the administrator settings.
  • Type SFC / Scannow and press Enter.
  • Windows will automatically search for files that are suspicious or corrupt and that cause problem to your PC.
The process might take longer depending on your storage architecture and operating system, x86 (32 bits) or x64 (64 bits), whatever. This will automatically resolve the problem if the corrupt system files are responsible.

DISM scanning

Installation analysis and deployment image management (DISM) requires a good Internet connection. Do not place the DISM scan and the SFC scan in the same category. They may sound very similar but are two very different things from a computer perspective. Here the DISM searches for and corrects the corrupted Windows Update online source while SFC searches for and corrects corrupt system files. To perform DISM:
  • Open the command prompt as administrator.
  • Type DISM / Online / Cleanup-Image / RestoreHealth and press Enter.
  • Now check if that works for you.

Restart your network adapter

Among all the solutions, it is the easiest to perform. There is a network icon on the left side of the taskbar, do the following:
  • Right-click on the network icon and click on Open network and shared resources centre.
  • You will be redirected to the configuration of the control panel (in case you are running the creators update) in which “Change adapter settings” will appear. Click on it and verify your connection, right click and deactivate.
Let us remind you that Microsoft is slowly migrating all settings from the Control Panel to the configuration application. You may not find the network adapter settings in the control panel if you run Fall Creator’s Update or a higher version. Well, if so, the process will be the same only to be redirected to the configuration application by clicking on “Open the Network Center and shared resources”. From there, you can easily search for the Ethernet option on the left side. Click on it and you will see the Change Adapter Option on the right side of the configuration application.

You must enable it again by right-clicking on the network connection following the same methods.

A bit of troubleshooting network problems

This is quite simple. Simply open your Configuration application and look for Update and security. You will see the option Solve problems on the left side. Right click on Troubleshoot, then right click on the Network Adapter section and click on RUN THE TROUBLESHOOTER.

Give your drivers a new life:

In an age of AIs and machine learning, we expect any operating system to perform all the necessary functions before the rescue arrives. The search for controllers to serve the user a performance without failures is a basic function. Sometimes it happens that Windows cannot install by itself. Although it is doubtful that the situation will continue, you can manually check for driver updates.
  • Type Device Manager in the Windows search and click on it to enter the device manager window.
  • Here you will find all the drivers that your computer is running in the background.
  • Among all the options, select the network adapter and check if there are any new updates available.
  • If you find one, make the update and see if that helps.

DNS server and Internet protocol configuration

In the Windows search option, press Win + R, run Windows, type ncpa.cpl and press enter. You should redirect it to the Network Connections page. Right click on the Ethernet option and click Properties to open the Ethernet Properties window.
  • Double-click Internet Protocol version 4 (TCP / IPv4) and verify whether the option Obtain an IP address is automatically selected or not.
  • You must select Obtain an IP address automatically and Obtain DNS server automatically in that window and then check if the problem persists.


Go to the Windows configuration and then type PROXY in the Find a setting bar. Click on Change a proxy configuration and make sure that automatic discovery settings are enabled.

A twitch of the Internet configuration

Press Win + R and type inetcpl.cpl and press Enter. Now press the “Advanced option” in the Internet properties window. In the lower left corner, click on the Reset option. It requires a reboot of the system to cause a complete impression.

If you do not want to do all the things on your own for any reason, there is some third party solution that may be of your help. Now be very careful before downloading any third-party solution. Remember that they will check your PC and often install other programs, which could expose your PC to malware.

With all this done you should fix the Windows could not automatically detect this network’s proxy settings error. Please comment below to ask questions.

Windows Could Not Automatically Detect This Network’s Proxy Settings

This post have 0 Comments


Next article Next Post
Previous article Previous Post

Contact Form


Email *

Message *